FABRICATION OF CENTRIFUGAL MIXER

2,500

Add to Wishlist
Add to Wishlist

Description

FABRICATION OF CENTRIFUGAL MIXER, Is A Well-Researched Topic, It Is To Be Used As A Guide Or Framework For Your Research. (download in EPUB or PDF format).

ABSTRACT

Fabrication of centrifugal mixer in accordance with the project is
a little manual constriction carried out to show the similarity of the big
industrial centrifugal mixer used for the mixing of solid, liquid and
gases in a company.

In the construction it was successfully achieved base on the
useful instruction and material suitable for the fabrication. Materials
like metal sheet of 14 gage metal sheet from pure iron is used.

The metal sheet was first of all measured and marked, while the cutting
commences immediately to get difference sizes for the work. It was
fitted after the cutting and assembled together by welding.

Finally, a sizeable container with centrally mounted shaft that
can rotate on its axis. At the end of the shaft is attached a flat blade
that carries out the actual work of pushing liquid outward towards the
walls of the container.

The basis design features of the paddle include the diameter of the shaft blade which should be 60mm to 80mm of the inside diameter of the vessel. The width of the blade is 30.5mm of is actual length. Generally, a paddle has either a pair of blade or two pairs of blade mounted at an interval. Then, it was sandpapered and painted which the final construction work of paddles is produced. It was certified by the supervisors as small scale fabrication of centrifugal mixer.

TABLE OF CONTENTS

TITLE PAGE i

LETTER OF TRANSMITTAL ii
APPROVAL PAGE iii
DEDICATION iv
ACKNOWLEDGEMENT v
ABSTRACT vi
TABLE OF CONTENT viii
CHAPTER ONE:INTRODUCTION
1.1 BACKGROUND OF THE STUDY 1
1.2 AIMS AND OBJECTIVE OF STUDY 3
1.3 SCOPE AND LIMITATION OF STUDY 4
1.4 PURPOSE OF MIXING 5
1.5 PROBLEMS ENCOUNTER 6
1.6 METHOD OF RESEARCH 6
1.7 SIGNIFICANT OF STUDY 7
CHAPTER TWO: LITERATURE REVIEW
2.1 DEFINITION OF MOTION

2.2 TYPES OF MOTION 8
2.3 THEORY OF MIXING 19
2.4 TYPES OF MIXER 22
2.5 FABRICATION 30
2.6 VARIOUS TYPES OF METAL WORKING 31
CHAPTER THREE: METHODOLOGY 33
CHAPTER FOUR: RESULT/ANALYSIS 38
CHAPTER FIVE: DISCUSSION 40
CONCLUSION/RECOMMENDATION 41
REFERENCES 43
APPENDIX 45

Additional information

Author

AGA MOSES OKECHUKWU

No of Chapters

5

No of Pages

59

Reference

YES

Format

PDF

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.